Edwin Harrington, Son & Co.
Illustrated catalog given to Lamar Lyndon ca.1890.  The firm was located at North Fifteenth Street & Pennsylvania Avenue, Philadelphia, Pennsylvania.
Webpage copyright © George Langford 2010
 Machine Tools, ca. 1890 illustrated catalog
Edwin Harrington Facing Lathes, page 34
FACING LATHES.
(FOUR SIZES.)
These lathes have all the features of those of same swing on preceding pages, excepting tail stock and screw cutting attachments; are very convenient for a large range of short work such as packing-rings and cylinder covers, steam and water valves, etc. By use of side block and regular tool block at same time, such work as packing rings may be turned and bored or cut off and faced at same time.

Swing over shears 25 inch 30 inch 32 inch 36 inch
Swing over carriage
 19 inch 23 inch 24½ inch 24¼ inch
Changes of cone
 4
 4
 4
 4
Width of belt
 3 inch 3¼ inch 4 inch 4 inch
Length of bed
 4½ feet
 5-2/12 feet
 5-10/12 feet
 5-10/12 feet
Movement of carriage front of plate
 20 inch 20 inch 20 inch 20 inch
2 pulleys, each
Hangers and countershaft included.
 16x7 inch 22x8 inch 22x8 inch 22x8 inch
Speed of countershaft per minute
 90
 70
 75
 75

Shipping weight                   
Price, $               
Boxing for foreign shipment, $